Charges

Leaks Plumbing Services Ltd shares the ideals of the Bosch Group, which are founded on quality, value and reliability.

Leaks Plumbing Services Ltd is the only local plumbing and heating company that has 100% transparent charges. We believe our charges to be fair and reflect the professional service.

Our charges will be mentioned during the first form of contact and will not change.

Boiler Service Ilkley

 

The charges above is labour only
All our plumbers and engineers carry standard parts aboard their vans and we always do our best to repair in the first visit. If a specific part is required that needs to be ordered then we will take all the necessary details and quote you while on site or send you an estimate via email / post to return and repair. You will still be charged for the first visit to investigate and diagnose at the full hour rate above even if we have diagnosed within 15min of arrival. Please note we will not return and repair until the invoice for the investigation and diagnoses is paid. All call outs for emergencies outside the hours above will be charged at £150.00 + vat per hour

Gas Safe Certificate Horsforth

 

Boiler Service
Boiler service can take between 20mins to one hour depending on make, model, age and how long since the last service. During a service visit what do our engineers do?

  • A visual inspection of the main components inside the boiler (these are also cleaned where necessary)
  • Check all the seals on the boiler are sound, also checking for any leaks or corrosion
  • A gas pressure check to make sure it is working to the manufactures requirements
  • An emissions check on the flue to make sure its burning safely
  • Check the ventilation is up to standard where applicable
  • Check all the safety devices are working correctly as per the manufacturers requirements
  • We will clean the magnetic filter (if one is connected to the system)

Gas Safe Certificate
Gas safety certificate can take between 30mins to one and a half hours depending on how many gas appliances are in the property. During a Gas Safety visit what do our engineers do?

  • Your gas appliances will be checked for gas tightness.
  • If test points are available, standing and working pressure will be tested.
  • Your Gas Safe engineer will check burner pressure and gas rate against the manufacturers data plate.
  • Checks will be carried out for the provision of all necessary ventilation.
  • Flue flow will be tested to make sure products of combustion are removed.
  • All flame failure devices will be checked for satisfactory operation.
  • Where appropriate checks will be made for physical stability, presence and effectiveness of stability brackets.